Testing

Our core qualitative approach is further strengthened by the fact that our products are offered after approval of renowned engineering consultants, Inspection agencies and statutory authorities like Lloyds Register, Bureau-Veritas, Tata Projects, Toyo Projects & Development India, IBR, SGS, RITES, Jacobs H & G and Bax-Counsel.

Some of highlights of the tests that our products undergo includes:

Eddy-Current Testing: This test is conducted to detect sub surface defects. It is carried out by using techno four flaw marking detection system on the entire length of the tubes as per the E426 with hole or notch standard.		Mechanical Testing: Mechanical Testing adheres to ASTM standards and is conducted for tensile testing, flaring, flanging, flattening, reverse bend lest, etc.		Hydro Test: We conduct 100% hydro testing on a hydraulic test bench using a high-pressure pump on all pipes & tubes. The tests also fully comply with ASTM A 249/ 13316 -1992 standards.
Air Under Water Test or Pneumatic Test: Even though this type of test is a supplementary requirement, we still conduct this test on all the tubes that we manufacture. We test our products by blowing compressed air into them to ensure there are no leaks or incomplete weldings.		Ultrasonic Testing: We also offer our clients the facility of off-line Ultrasonic Testing. For this purpose, we have an in-house four-probe water emulsion system with a microprocessor unit to detect inconsistent process flow. In addition, the system can also mark the detected areas by spraying. We can provide facility to measure ferrite content, micro structure examination for grain size determination, and other such tests to fully satisfy our clients.		Chemical Testing: We carry out a full chemical testing of tubes and pipes as per the ASTM standards, on the latest optical Emission Spectrometers.
Radiography Testing: We can provide our clients with radiography testing facilities with an X-Ray unit that is at a short distance of 5 Kilometers form our unit. 5 Km Vicinity of plant.		Corrosion Testing: To find out the susceptibility of products to intergranular corrosion attack or to measure rate of corrosion, we conduct the IGS test as per A-262 practice A B C or E in our NABL accredited laboratory or at any other independent laboratory as per the requirements of our clients.		Visual Inspection : For surface finish, dimension, checks on edges and the length are carried out on 100% tubes. Test ensures the straightness of the tubes as per the ASTM standards.